The Apple iPhone 5s was announced on September 10, 2013. Repair of this device is similar to the previous models, and requires screwdrivers and prying tools. Available as GSM or CDMA / 16, 32, or 64 GB / Silver, Gold, and Space Gray.

3002 Questions View all

Screen not properly working after replacement

Hello Peeps!

I replaced my cracked screen 2 days ago (was not my first 5s screen replacement) and it worked fine for about 1 1/2 hour.

Suddenly the screen went black and when pressing home or power button the screen only slightly lights up (reaaaaally slightly).

Checked if all cables are connected properly and did all software stuff i know about!

iPhone is clearly on as it vibrates when connected to the charger or when switching the mute/unmute button!

Any suggestions or anyone had the same problem who found a solution?

Thanks in advance!

Answered! View the answer I have this problem too

Is this a good question?

Score 1

Comments:

Did you hard reset? Try pulling and replugging battery if that doesn't work.

by

Add a comment

1 Answer

Chosen Solution

Not a software fault, definitely hardware. Sounds like you may have caused more damage when you replaced the screen yourself.

If you know anything about board repairs, id check the backlight circuit on the board.

If you don't, take it to someone who can do micro board level repairs.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Moritz will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 61