Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

After water damage no function but board seems working.

Hi guys,

I am repairing an iPhone of a friend and I now faced a problem I'm not familiar with.

Short version:

Phone remained in a jacket outside during rain. Since then no function. I opened up the phone but there was no corrosion visible. I put the board into my iPhone 6 and run it. Since it turned on the board should be okay.

I tried to find defect parts by exchanging them. I put a new battery, power button cable, lightning dock cable and volume buttons cable in. But still no reaction. Neither by pressing the power button nor by plugging in the USB cable. Even iTunes keeps silent.

Does someone of you know any component that be causing the defect I not exchanged, yet? Or could the housing cause the problem? I'm like 404...I'm thankful for every further idea :)

Chris.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

If you have access to another phone as you say you tried the board in another phone try testing the display. Water damage is not restricted to the board .

Was this answer helpful?

Yes No
Score 1

3 Comments:

Oh I didn't mentioned but as I switched the board I also used the display of the "damaged" phone. The display should be okay as well.

by

so the display and the logic board both worked in another phone? connected together in that phone?

by

yes. both worked in my phone.

by

Add a comment

Add your answer

chris9211 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 93