Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus.

4271 Questions View all

New Screen, No Touch

Put a new LCD/Digitizer on my friends phone. I've replaced 15+ iphone screens, and this one has me stumped. Screen looks good, but no touch. Re seated the digitzer cable, and still nothing. Any suggestions?

Answer this question I have this problem too

Is this a good question?

Score 4
Add a comment

3 Answers

Most Helpful Answer

Common hardware issue after screen replacement, I've work it out with this guide:

Was this answer helpful?

Score 1
Add a comment

You need to make a microsoldering job, try this solution:

How to repair touch [hardware issue] iPhone 6

Was this answer helpful?

Score 1
Add a comment

Take a look at the connections on the phone side and screen side under a microscope and make sure none of the connections are damaged.. Sometimes if you put too much force or push the connectors too far you can damage a pin...

It also could be a defective screen... the screens on ifixit are the best quality on the internet...

If you could post some photos I don't mind helping you further..

Was this answer helpful?

Score 0
Add a comment

Add your answer

Carson Stone will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 97