Stator replacement on the FA50
Just picked up a new project the other day. I am going through it, getting ready to order the parts that it needs. My questions are as follows:
1. The stator cover is off, and this is where the stator is supposed to be. The coil was jb welded to the case, with a magnet sitting on this "flywheel". Is this something that can be undone, and the oem stator put back in?
2. There isn't an oil tank under the seat, so I don't know the diagram of where the hoses go to the pump.
If anyone can help out with these questions, I would be extremely appreciative.
[<iframe width="480" height="360" src="http://s132.photobucket.com/user/andypap...></iframe>|What is this?]
Is this a good question?