Fix Your Stuff Community Store

Announced on October 16, 2014, the iPad Air 2 is a thinner successor to the iPad Air.

449 Questions View all

Options

IPad Air 2 Replacement Screen Not Working

I replaced my broken iPad Air 2 LCD Screen and Digitizer with a new one.

But when I tried to turn on the device, after the repair, it will not start.

I used an iOpener (heated it in microwave for 30 seconds) and a plastic spudger, and followed the teardown video. I'm not sure where I screwed up. Any help would be great.

Thanks.

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
1 Comment

I've found out my problem. I tore up the small rectangular piece (on the left side of home button) that is soldered on.

by

Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Did you try unplugging the battery and performing a hard shut down? You can do it by holding power and home button for about 10-15 seconds.

Was this answer helpful?

Yes No
Score 2

1 Comment:

I tried it, but nothing happens.

by

Add a comment

Options

I've found out my problem. I tore up the small rectangular piece (on the left side of home button) that is soldered on.

Block Image

Was this answer helpful?

Yes No
Score 0

2 Comments:

I'm about to do this repair. Does this have to soldered on to the new screen?

by

Yes. And don't lose it.

by

Add a comment

Add your answer

Phil will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 213