Skip to main content

Fix Your Stuff

Right to Repair

Store

The 2014 version of the Galaxy Note 10.1", running a Exynos 5 processor and 3 Gb of ram. Released October 2013.

136 Questions View all

Battery connector broke off board

Hello all,

I recently had a black screen which I found a fix for (reseating the LCD cable) but before that I figured it was broke so was careless when removing the battery connector and broke the black part the was soldered to the board. I can hold it to the board and it powers on. I am wondering what is the best way to get it connected on the board again. is there strong adhesive I can use?

pictures

http://i1186.photobucket.com/albums/z369...

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

I wouldn't use an adhesive if i were you, best solution is to try and resolder those 6 pins back on the board.

Was this answer helpful?

Score 0
Add a comment

Add your answer

James McLeod will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 261