Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 Plus that was released on September 19, 2014. Model: A1522, A1524

1525 Questions View all

Options

iPhone 6 Plus touch screen issues - replaced screen as well

Hi,

I have an iPhone 6 plus i replaced the back on as it had bent a little.

The phone worked fine for a while and I had removed the screen multiple times to clean camera lens and replace it etc.

Then the touch screen cable wouldn't click down as well and I started getting a couple of lines on the same spot intermittently and the digitizer became erratic and wouldn't work where the 2 lines were.

I replaced the screen and am still having ghost touch issues. What gives?

I had sent off the screen to someone to replace the digitizer FPC connector and he said that there was continuity on all pins and it was all in perfect condition

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

If the connector is in good working condition, then I would guess the display is the culprit. Where did you purchase the display from?

Was this answer helpful?

Yes No
Score 1

1 Comment:

It is ghosts touching in the same areas the lines used to occur on the old screen... I presume it's possible that the pins are slightly damaged on the motherboard?

I have heard the touch ic chip can also become faulty but wouldn't it just stop working completely?

by

Add a comment

Add your answer

Brick50 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 213