Rep: 13
1
Hello, so basically i replaced a touch screen on an ipad mini one and after there were lot of lines in lcd. i thought i have broken the lcd and changed a new one but there is no display on new lcd. i have changed 2 new lcds but no dispay on both ofthem but if i put the original lcd back display comes on with lines. apparenly there is no crack on original lcd. So what should i do.
Is this a good question?
Rep: 1
1
1
The lines on the old display is probably from a bent or creased ribbon cable. I'm not sure why the original panel will turn one while the new ones will not. Double-check the connector pins to make sure you didn't bend or break them accidentally.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 57
