Rep: 133
3
5
I have a model 1286 MacBookPro 9,1 and the UPGRADE to Windows 10 worked on it from the previous installed Windows 8.1 PRO ...
But installing on a new SDD failed with Boot Camp 6 later, any idea what could be the problem ?
Is this a good question?
Rep: 478.9k
35
329
970
Using an external Mac OS-X bootable drive open Disk Utility and reformat the disk to GUID patition map and create a journaled file system partition for the Mac OS. Once done install a fresh copy of OS-X onto the SSD. At this point I would make sure the systems firmware is up to date. Follow this Apple T/N: About EFI and SMC firmware updates for Intel-based Mac computers. Make sure you are at the level listed or newer. I would also make sure the OS updates are also applied at this point.
Here is the Apple page which goes over the process of setting up Windows with BootCamp: Boot Camp Support
And here is a link to the Windows drivers you'll need: Accessing the Windows drivers via Boot Camp Assistant app.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 611
Who's SSD is in the system?
by Dan
MINE ! ;P
( Samsung SSD 850 EVO with 1TB )
by MEX