Skip to main content

24" display; Built-in iSight Camera, Microphone, and Speakers; 1920x1200 resolution. Released October 2008, identified by model number A1267.

84 Questions View all

A1267, MB382LL/A everything but lcd backlight working

I just got a used 24" LED Cinema Display. Everything works except for the LED backlight. By everything, I mean the sound, USB, camera, the LCD display...

I can shine a flashlight on the screen and see the display working, but there's no backlight.

i've checked and re-seated all cables, and I can't find anything fishy other than this VR. it seems to be a little brown around the solders, and the plastic protector on the back of the logic board has melted a bit directly beneath it. the regulator is the center one.

Block Image

Block Image

i've run through the apple troubleshooting flowchart, but i don't know where TP81 (test point) is.

thanks in advance

Answered! View the answer I have this problem too

Is this a good question?

Score 0
1 Comment

ok, i found the diagram and tested the correct voltage at every point. i ran through both the BLANK/NO VIDEO and DEAD/NO POWER flowcharts, and everything tested ok. at this point, i'll have to assume i've got a bad function cable, or bad LED backlight?

by

Add a comment

1 Answer

Chosen Solution

eBay logic board $92.99

all is well

Was this answer helpful?

Score 0

2 Comments:

Hey - I've got a similar problem - just wonder if the logic board fixes the backlight? Or was it something else? If you see this, I appreciate your answers! Thanks!

by

yes I replaced the board, and the monitor is currently still in service!

by

Add a comment

Add your answer

Ronnoc Nailli will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 2,438