Diagnostic mode for Kenmore Elite He3t model 110 42926 110 washer
This Kenmore 110 42926 220 washer look like it should work. But when you press the start button nothing happens, yet the leds come on solid ( not flashing ). The door doesn't lock , ETC. I tried to reset by pulling the AC off for twenty minutes several times. Then unplug /plug AC, shut the door and hold both the Start and cancel in for an count of twenty. I tried to enter the diagnostic mode but it wouldn't come on . I tried several methods suggested by Online and U-TUBE. Is there a different way to enter the diagnostic then the others or does this mean the CC module isn't working right ?
Is this a good question?