Fix Your Stuff Community Store

Repair information and guides for the Apple iPhone 5c that was announced on September 10, 2013. Model: A1532, A1456

1233 Questions View all

Options

Phone won't power on after screen replaced

I have replaced the screen and battery in my iPhone 5c and the device will not power on I have tried to hard reset the device leaving it to charge and still nothing before I replaced the screen and battery in the phone. it worked great until idroped the device and the touch screen stopped workings of I replaced the screen I left it in my draw for about a week and after that the device will not power o and device will not power on so I replaced the battery and the device will not power on at all

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Check the batteries voltaje (both de new and the old) to be sure that they are at least charged.

If the batteries have at least 3.5v leave the phone charging by 30 minutes, and check again, if you got the same lecture or less the issues is in the charger port.

Also if you have an external power supply charge you battery until they are in 3.9v o above and try again to turn your phone on.

Was this answer helpful?

Yes No
Score 1

1 Comment:

thank you shura you have fixed my problem very much aperesiated advise thank you dude

by

Add a comment

Add your answer

callummccabe will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 121