Skip to main content

The third generation of the DJI Phantom series released in April 2015.

59 Questions View all

Remove the camera so I can flip it

Today my Phantom 3 Standard crashed on the ground. This resulted in the camera being vertically flipped (DJI logo is on top upside down). How do I get the camera off the gimbal, so I can turn the camera and put it back on?

Answer this question I have this problem too

Is this a good question?

Score 0

1 Comment:

I have just done the same thing, really wanting to know how to restore the camera to its original position...any help?

by

Add a comment

3 Answers

I had the same problem and fixed it. I assume you've fixed yours by now. If not contact me at mikewade54@sbcglobal.net and I'll walk you through it

Was this answer helpful?

Score 0
Add a comment

Hello I am having same issue can u help please

Was this answer helpful?

Score 0
Add a comment

I had the same problem after a crash. The only way I could find to fix was to take a very small flat tip screwdriver and wedge it between the gimbal stop then gently slid it to its forward position. My camera is facing a couple degrees to the left but for me it's a bent gimbal arm that I'll replace at a later time.

I hope this helps and I'd be extremely gentle if you try this.

Was this answer helpful?

Score 0
Add a comment

Add your answer

melvinerne1993 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 703