A series of 40 inch LCD HDTVs by Sony.

71 Questions View all

7 red blinks ,3 second gap, repeated when switched on

No ability to switch on, only 7 red blinks that repeat. This is a 200 mh KDL 40 HX 700.

For a few days power off completely allowed normal function, now no ability to power on.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

7 red flashes- main board over heating, can be short on power board or main logic board

I'd open it and look for a burned spot. I'd go for the power board first.

Possibly a cold solder joint.

Here's a video on identifying a cold solder: https://www.youtube.com/watch?v=h5_dBMuJ...

Here's one on repairing it: https://www.youtube.com/watch?v=5dG0fwE7...

Was this answer helpful?

Score 4
Add a comment

Add your answer

Mike Sheedy will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 65