Rep: 1
1
MacBook Pro 13" Unibody Mid 2009
Is there anyway i can replace my charging board without having to take out the logic board. Im in Afghanistan, and i dont want to lose any parts. And i dont want to have to go through more trouble then needed to fix my problem.
Is this a good question?
Rep: 32.4k
207
156
62
Hi! No, it's not possible without risking damage, because the DC-in plugs into the underside of the logic board, and it's necessary to lift the board up in order to get access to the connector. However, the 13" Pro logic board is very easy to remove, and the process only takes about 20 minutes. Just be careful, keep the screws organized, and follow the iFixit guide, and you'll be fine.
Was this answer helpful?
link to guide?
Here's how to do it: MacBook Pro 13" Unibody Mid 2009 DC-In Board Replacement
+ Here's the part: MacBook Pro Unibody 13" and 15" MagSafe DC-In Board
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 1,149
