This is the first generation of the Ford Escape, a compact crossover SUV. Production started in 2000 for the 2001 model year.

64 Questions View all

no brakes when starting car

i replaced my drivers side caliper and hose and i bled the brakes and now i lose break pressure when i start my car ?

Update (03/09/2016)

i have pressure before i start my car then the petal goes to the floor and there is no fluid coming out of bleeder

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Check for leaks in the lines . Make sure all fittings are snug and have no moisture on them .When you changed the hose and caliper did the master cylinder loose fluid ?

You may need to bled the master cylinder if it got air in it it must be bled separately .

Was this answer helpful?

Score 4

Comments:

i have pressure but when i start my car i lose pressure and very little fluid comes out of the bleeder

by

than you for your help , it's weird i have brakes now i let my car sit for two days and it seams the air worked it way out of the system , so thanks

by

Hi longm129,

If air can get out so can liquid so keep an eye on the brake fluid level in the master cylinder.

by

ok, i will keep an eye on it , thank you

by

Add a comment

Add your answer

longm129 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 83