A washer series by Maytag with a low rate of customer satisfaction and a high rate of failure.

113 Questions View all

Time display dark and washer won't fill

I moved recently. the movers did not drain the washer. The water valve broke. I replaced it and now the washer display comes on lights up but the time display remains dark. When I push the start button nothing happens. the water never starts to flow, the lid does not lock and the cycle does not start.

I was told to replace the control module. I changed it and there was no change. what next? A new washer?

Thanks,

Anne!

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Is this a 110V wall plug or a 220V? If a 220 V use a multi meter and see if both sides are hot. Also flip the breakers to reset them. Unplug the machine before doing so and leave it unplugged for five minutes.

Was this answer helpful?

Score 2
Add a comment

Add your answer

zpowers907 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 66