Hello,
I have changed the display on my iPhone. 6 After starting the iPhone, the front AND back camera stop working.
I have a hard reset performed, and have my iPhone reset to factory settings.
Now i have baught and installed a new front and back camera, but it still doesn't work.
Someone has a solution?
sorry for my bad english :D
Is this a good question?
Rep: 211
3
Hi Manuel, there is a small IC called U2301 on iphone 6 motherboard that is responsible for giving the tension that allows both cameras to work. Is near the camera connector and covered with black glue but I'm linking a picture to show you where. You should check if you could have damaged it while removing the lcd, digitizer and camera connector on the board. Bye.
Was this answer helpful?
Rep: 1
5
i also had the same issue and the motherboard component wat at fault which i got replace, brought he new from here at ifixit and its working like a butter now
Was this answer helpful?
@lissacoffey which component did you replace?
Rep: 2.3k
7
5
1
Hi Manuel
Can you check if there is any damage on the connectors on the motherboard, or perhaps component on the motherboard is broken?
Was this answer helpful?
Which component could it be?
I am not sure which component can be (I am not as good as some people around here), but if something is missing from the board this mean something is wrong :)
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 106
