Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

Replaced loudspeaker & Lightning Connector - still NO SOUND! :(

My iPhone 6 was dropped, and the loudspeaker stopped working.

I have purchased and replaced the following parts:

- iPhone 6 Loudspeaker

- iPhone 6 Lightning Connector and Headphone Jack

There is still no sound from the loudspeaker. (No sound in speakerphone mode, no sound in videos, music, no alert sounds. Sound is only heard in phone calls if non-speakerphone mode is active. )

Everything else on the phone seems to work. Sound works in headphones.

I have also tried:

- Resetting the phone to factory state.

- Ensuring that the volume is all the way up.

- Ensuring that the headphone icon is not visible.

- Ensuring that Bluetooth and AirPlay are off.

- Ensuring that the lock button is off.

It seems like there must be some other hardware issue. There is a large crack on the bottom-right corner of the phone. is there any other part I can replace, or is there any way to further diagnose this issue?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score -1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

It's important that the charge port assembley is installed correctly, the loud speaker has to be allined correctly to sit on the two copper pads. Yes there could be a logic board issue, especially if it was dropped hard. It takes some specialized testing tools to diognose board level repairs. Stop by your local repair shop that has experience with board level repairs.

Was this answer helpful?

Yes No
Score 1

1 Comment:

Thank You, this was very helpful.

by

Add a comment

Add your answer

robotiphone will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 652