Rep: 13
1
1
I have a faulty Roomba 560. afer substitution teting I gather the problem is in the board.
I suspect the problem may be in some capacitor as the problem is intermitent but recurring.
simple screw driver dismantling left me short of the pcb.
Where can I find instructions to access the pcb?
Is this a good question?
Rep: 78.2k
384
96
162
Hi, Here's a link to the service manual. Hope it helps.
Was this answer helpful?
+ research
Thanks, most useful info
Rep: 109
2
1
I had a similar problem, but had to replace some sensors on the board. Looked all over for a fix. Found an affordable one that worked well. took an hour or so.
http://eesolutions.ca/roomba_repair_kit....
I'd recommend it. Took forever to find the site though.
Was this answer helpful?
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 2
Past 30 Days: 11
All Time: 13,282
2 Comments
Did you try to find solution from irobot customer care? I think you should not fix roomba by yourself, it's still a high tech machine anyway
by JessicaAdams
Oh, try to find answers form other sites like http://irobotroombareviews.com/ I've just catched it last week and it's quite useful
by JessicaAdams