Fix Your Stuff Community Store

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2688 Questions View all

Options

iPhone 6s Screen Wont Stay Powered after Replacement.

I have professionally replaced (litereally) hundreds of iPhone 6 and 5s Assemblies and LCDs however after replacing my first 6s with an OEM assembly I clicked the power button and the screen showed up perfectly then dissappeard an will not power back on.

I have replaced the screen

I have replaced the button

I have installed with the battery disconnected

I am using all the original cables and buttons

I have tried soft resetting

This phone connects to iTunes perfectly and periodically i can click the side or power button and see the screen for a split second again before it turns back off and wont power again.

Please Help!

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Have you tried putting the old screen back on, to rule out the new screen being an issue?

Was this answer helpful?

Yes No
Score 1

2 Comments:

Old screen is destroyed. Have attempted with two brand new assemblies no luck with either.

by

The only thing that I can think of, is the LCD socket on the logic board. I'm starting to guess, it's a logic board problem. Which you could seek out the iPad rehab people. They're very good, and have a mail in service. The owner, Jessa Bethany, contributes on this site, and you could potentially ask her about it. She'd probably know better than me

by

Add a comment

Add your answer

Cellflo Sebring will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 180