Skip to main content

The ProScan PLT7223G Tablet, manufactured by Curtis International, is a basic Wi-Fi enabled tablet that is intended for personal or professional use.

9 Questions View all

Why won't my tablet charge?

-I have tried plugging in my charger with the tablet to several outlets in my home but it still won't charge.

-I have tried replacing my charging cable and wall adapter but that doesn't seem to be the issue.

-I have attempted the factory reset but that didn't help.

I was wondering if it could be an issue with the charging port or the battery itself. Any Ideas?

Answered! View the answer I have this problem too

Is this a good question?

Score 4
1 Comment

My tablet with not hold a charge. Charger gets warm after few minutes

by

Add a comment

3 Answers

Chosen Solution

The problems may caused by a broken charger, dirty charging port or faulty charging port. To fix the problem, check the troubleshooting page for not charge part.Proscan Will Not Charge

Was this answer helpful?

Score 4
Add a comment
Most Helpful Answer

Hard to say exactly what it is, without looking at it, but my iPhone had the same issue and it was differently the charging port. I had to have it at a specific angle to catch the charge. It would seem to be an issue with the port, where a battery would slowly hold less and less of a charge before not holding any charge.

Was this answer helpful?

Score 4
Add a comment

Your iPhone had to be used in a Angeles

Was this answer helpful?

Score 0
Add a comment

Add your answer

Daniel Hernandez will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 18

All Time: 4,170