New screen, quick blue screen and boot loop, no screw issue. DOA?
Hi there people, I have tried to search the forums here and after getting a new 5s screen from ifixit and making sure I watched the videos before attempting anything which helped as things changed since I had previously replaced two screens on my 4s I now have a common problem. I understand that the 4 screws for the shield are very specific and even went so far as verifying them with a caliper before reinstall, I now get about 15 seconds of the apple logo then a quick flash of a solid blue screen and then it all repeats again. I have verified that I did not damage the mobo traces as I put in my old cracked screen and it booted up fine as normal and with the new screen again it keeps going through the boot cycle/ quick blue screen.
Along with carefully making sure the ribbon cables were not tugged on or damaged along with the connectors themselves could this possibly be a DOA screen?
I appreciate any answers regarding this from the helpful community.
Is this a good question?