HP's expandable, RPN-based graphing calculator. Manufactured from 1990 until 2003.

13 Questions View all

Are there any repair kits available? my keyboard doesn't work

Only the enter, 7, 4, 1 and zero keys work.

How do you open the case without destroying the case and/or looks?

Any common problems with the keyboard that I should look for?

Once I'm inside, are there any upgrades to do before I exit and put it back together?

I love this machine, it got me through engineering school and I really hate to abandon my "war buddy"

Any suggestions would be appreciated,



Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment

3 Answers

Chosen Solution

Here is a link to a series of doc files from HP on your calc. Hope it helps. Ralph


Was this answer helpful?

Score 5


Thank you for the links, lots of interesting information about my calculator.


Add a comment

The problem lies with the ribbon cable between the keypad and display. It either works loose or corrodes slightly.

Non invasive solution:

Press the front hard between the 2 leftmost function keys at the top of the keypad while using the keypad. It's really awkward but it works.

Invasive solution:

This involves sliding a blunt flat tool (spatula?) into the side join of the case by feel and then using a thin knife to locate and cut the plastic pillars in the middle of the case. I am sorry this is not very detailed but I decided not to risk it myself and have since lost the link to the site that gave instructions.

I hope knowing it is out there will help you to search and find it.

Was this answer helpful?

Score 2


+ it's an old thread but looks interesting :-) anyhow, here are some more instructions for the dis-assembly http://www.ehow.com/how_6648559_disassem...


Add a comment

This is an older article, but just to add my two cents if anyone comes by here later. This device is a giant pain. Even using my fancy toolkit from iFixit, I've been whipped.

Yes, there are plastic rivets inside that hold the two halves together. There are instructions I found on hpcalc.org that indicate you can pop them apart and still reassemble with no issues. Well I got the two rivets at the top of the screen apart, but I wasn't able to get them snapped back together. The link at ehow.com listed above say to pry off the metal label cover off so you can drill out the rivets and reassemble using machine screws, which sounded like an appealing option in case I needed to get in again. But all I succeeded in doing is warping the cover in multiple places from the spudger underneath the face plate because the glue is just too tight. I stopped before I had bumps all over the face of my calculator.

Nevertheless, this article did have a solution for me: just press the face of the calculator just below the screen and above the soft function buttons to re-establish any loose connections.

I'll go hang my head in shame in the Corner of Failure now.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Timothy Parker will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 25

All Time: 4,374