Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

iPhone 6 won't turn on after replacing WiFi module

Hey,

I've had greyed out WiFi and Bluetooth in settings so decided to replace WiFi IC on the motherboard. Heated up the component with heat gun, cleaned the area, applied flux and replaced with the new one, heated up and left to cool down. After that phone didn't switch on anymore, went take a charge either. Any idea what went wrong?

Thanks.

Answer this question I have this problem too

Is this a good question?

Yes No
Score 1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

Try reconnecting the battery, close the phone back up, heat for a couple sec and the stick in the freezer for 10 mins. also hold the power button and home button for 1 to 2 mins if not powering on. I used to be an itech.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Luke Walczak will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 200