The phone won't turn on when the "End" button is held.
The device manual says that the phone should turn on when I hold down the "End" button, but it doesn't.
Is this a good question?
It is likely that the logic board is malfunctioning. It could be anything from a faulty connection to a burned out circuit. Since the electrical components of this phone come pre-soldered onto the logic board, the only way to truly remedy this is to replace the logic board. See how on the logic board replacement guide here.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 28