Skip to main content

Black and silver single cup coffee maker with water reservoir on the left hand side. K40/K45.

92 Questions View all

Can the pin (that penetrates the k-cup) be replaced?

Keurig Elite pin is broken.

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment

2 Answers

Most Helpful Answer

yes but if you call keurig they will replace your unit :)

Was this answer helpful?

Score 1
Add a comment

Askbelieveachieve the top piercing needle is part of an assembly. Not sure if there is a replacement available, but to get to it follow How to open and clean Keurig Coffee Maker|this guide] up to Step 5. There you see two screws that hold the assembly (red)

Block Image

as well as two smaller screws that hold the water supply line to the water inlet (blue). If you have not already done so, remove the two bottom screws from the assembly

Block Image

With all screws removed a push on the water inlet spout downwards should free the assembly. That was the fun part. The hard part will be to find a replacement. Every now and then they pop up at places like this

Was this answer helpful?

Score 0
Add a comment

Add your answer

Askbelieveachieve will be eternally grateful.
View Statistics:

Past 24 Hours: 4

Past 7 Days: 19

Past 30 Days: 73

All Time: 8,263