Fix Your Stuff Community Store

Apple's 2012 first-generation 7.9-inch iPad mini, with 16, 32, or 64 GB of storage and an A5 processor.

630 Questions View all
Question Closed

Options

Digitizer Not Responding After Replacement

Okay so I replaced the digitizer on a customer's iPad mini, something I have done multiple times. The home button worked but the touch functions did not. I thought it was a defective digitizer at first so I had two new ones sent to me. Both of them do the same thing. I have done multiple hard resets and reseated the cable numerous times. The jack for the digitizer flex does not look damaged. What could be the problem?

Thanks!

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

If it was working before, and now you've ruled out the parts. Gonna guess you've damaged something in there. I just had an issue with an i6, didn't seem like it, but I must have broken the camera flex, somehow, during a repair I've done so many times

Was this answer helpful?

Yes No
Score 1
Add a comment

Options

iPad Mini FPC Connector is a commonly damaged connector during repair. Google image it and and compare to your board to see if pins are broken.

Was this answer helpful?

Yes No
Score 1
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 116