Rep: 1
1
It's hard to tell from the photos what would prevent someone from removing the paint from the inside back glass. Is there a lot of stuff glued to the glass?
And if you did remove the paint, could you see the electronics inside, or would it be blocked by plastic or whatever?
Thanks!
Is this a good question?
Rep: 13
1
yes you can, i did so a couple days ago, although you will have to remove a metal sheet and what not on the inside, i used a razer blade to take everything out, its not the best lookin.. but still nobody else has a clear back plate that they have done themselves..
a pic of my back: http://sphotos.ak.fbcdn.net/hphotos-ak-s...
Was this answer helpful?
Rep: 1
1
> It will show the electronics if possible
What do you mean, "if possible"? That's what I'm asking, is it possible?
> but you have to be careful on the front assembly
I asked about the back, not the front.
Do you have anything useful to say?
Was this answer helpful?
Rep: 1
1
Sure... but there are some plastic pieces attached to the glass, and the parts you'd see are pretty bland... like the battery, and not a whole lot else.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 4,860
