Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all
Question Closed

Front camera not working correctly after install of iPhone 6 Display

I purchased the iPhone 6 Display Assembly with Front Camera / Fix Kit /

Black. I installed the whole screen assembly perfectly. For some reason my front facing camera that came with the kit starts to work fine for about 5 seconds then it freezes and will not take a picture or go on until i shut the phone down and power it up again. Like i mentioned before, I'm certain that all my connections are tight but it does seem to work in the beginning but freezes. doesn't sound like a connection but I may be wrong. I think it's something else . any feedback on this ???

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

Thank you. Yes I do have the old camera. I could swap it out. I do remember the old front cam did work. Thank you very much that probably is the problem. I most likely will have to send it back.

Thank you again

Was this answer helpful?

Score 0
Add a comment

It sound's that the camera could be a defective one, do you still have the old camera to swap out and test with that one to see if you are getting the same problem?

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 119