How to verify the logic board
How can the logic board be verified? LED #1 is lit but others are all off and when the power button is pushed nothing happens. The iMac will not power up.
Is this a good question?
How can the logic board be verified? LED #1 is lit but others are all off and when the power button is pushed nothing happens. The iMac will not power up.
Is this a good question?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 80
1 Comment
I just replaced the power supply and it's still the same. Only LED #1 is lit and iMac won't power up. I disconnected the power button and checked continuity, it seems ok. Power supply pin 5 has 2.6 volts, pin 9 has 12.2 volts and the rest are all 0.
by srsd