After leaving batteries in camera for a long time the batteries leaked and caused corrosion on terminals on bottom on battery holder cap. Corrosion cleaned off and it still won't turn on.
Is this a good question?
Rep: 781.5k
1.1k
893
2.3k
Lars, clean the whole logic board. You may have corrosion that reached past the battery contacts. Male sure that the corrosion did not damage any traces or components.
Was this answer helpful?
How do I get to the logic board?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 258
