Fix Your Stuff Community Store

The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying. Released on March 11th, 2011. Model numbers: A1395, A1396, and A1397.

730 Questions View all

Options

Black Screen Apple Symbol very very dim

I have a generation 2 Ipad A1395. The screen is black with the apple coming on and then going VERY dim to where I can barely see it.

I have tried the TAP TAP TAP trick.

I have held down to do a reset.

I have plugged it into the computer while holding the button.

I have put a plastic piece under the area inside the Ipad where it is supposed to be helping with the dim feature.

I have REPLACED THE LCD screen.

Nothing I have done has obviously fixed the problem.

Where do I go from here?

Any help would be great!

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Well, if I have to guess: if resetting (Power + Home Button pressed together for ~15 seconds) doesn't bring back the normal level of light;

AND, replacing the LCD cable then the LCD itself doesn't solve it;

Then you probably have an issue with the board / the backlight circuit.

Proper troubleshooting should be done at board level (LCD connector, filters, diodes, etc.)

If you have the schematics, the tools, and the needed knowledge to troubleshoot the board, this is the way to go.

If not, you will have to send it out or take it to someone who has the knowledge and the tools. If you need advice as to who may be able to fix it for your, let me know where you're located.

Was this answer helpful?

Yes No
Score 1
Add a comment

Options

when did it start? When you were doing a digitizer replacement? Sounds to me like you may have burned up the backlight filter.

Was this answer helpful?

Yes No
Score 0

2 Comments:

My mother-in-law gave it to my wife and it worked fine for awhile. Then it went weird. I could lay it on my lap, tap the back and it would come back on. That worked for awhile, but now nothing happens. what/where is the backlight filter?

by

thats odd, thats not how a backlight filter will act. once the backlight filter is blown, its toast, no intermittent function.

The backlight filter is on the board near the edge of the shield. google it. Its not likely a DIY repair.

by

Add a comment

Add your answer

sam will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 196