Released April 2010 / 2.4, 2.53 GHz Core i5 or 2.66, 2.8 GHz Core i7 Processors

488 Questions View all

Charger wasnt chg'g #2 of the 5 pins is pushed in. Fixable?

#2 gold pin is pushed in. Can it be pulled back out? Mac isn't charging. I'm assuming this is the problem.

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment

2 Answers

Most Helpful Answer

Unplug the Mag-Safe adapter then use a wooden tooth pick to push the pins in and see if you can get it to release. The # 2 & 4 pins are the pins voltage is carried through. Heres the pin out: https://en.wikipedia.org/wiki/MagSafe

Was this answer helpful?

Score 2
Add a comment

I'm pretty confident that's why it's not charging too. It's easier to just replace the DC-IN board on that model. It's about $15 on eBay for the part and the guide is of course on here. I have attempted to pull pins out, never had any success personally.

Was this answer helpful?

Score -1

Comments:

The issue is with the Mag-Safe adapter, not the DC in board.

by

Add a comment

Add your answer

Tam Koonce will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 54