Charger wasnt chg'g #2 of the 5 pins is pushed in. Fixable?
#2 gold pin is pushed in. Can it be pulled back out? Mac isn't charging. I'm assuming this is the problem.
Is this a good question?
#2 gold pin is pushed in. Can it be pulled back out? Mac isn't charging. I'm assuming this is the problem.
Is this a good question?
Unplug the Mag-Safe adapter then use a wooden tooth pick to push the pins in and see if you can get it to release. The # 2 & 4 pins are the pins voltage is carried through. Heres the pin out: https://en.wikipedia.org/wiki/MagSafe
Was this answer helpful?
I'm pretty confident that's why it's not charging too. It's easier to just replace the DC-IN board on that model. It's about $15 on eBay for the part and the guide is of course on here. I have attempted to pull pins out, never had any success personally.
Was this answer helpful?
The issue is with the Mag-Safe adapter, not the DC in board.
Past 24 Hours: 2
Past 7 Days: 6
Past 30 Days: 7
All Time: 1,631