Skip to main content

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203 Questions View all
Question Closed

Removing bluetooth*step 26* screw will not budge*screw head w disfigur

I'm trying to replace a bluetooth in my macbook early 2008. In trying to remove screw to speaker in step 26 so I can get to the the bluetooth, I have damaged the screwhead because I tried every tool I had and still the screw will not budge. Too tiny and too much in the way to use a hacksaw.

It's the only screw in all those I've removed that is truly stuck. All this work and patience and I'm dead in the water. Any suggestions are welcome. Thanks! Mary

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Engineer makes screw pliers that are cut so that the end can be used to grip a screw head. The Engineer PZ-57 Screw Pliers M2 ... Happen to be carried by iFixit in 3 different sizes. These are incredibly helpful.

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 43