I would like to change the case of my Mcbook Pro 13, on the screen side of the case it got hit on the right upper corner but the screen is not broken. I would like buy the part is possible.
Thanks
Is this a good question?
Rep: 4.8k
14
18
6
It sure is possible, depending on where the damage is and which part you mean:
MacBook Pro 13" Unibody Lower Case
- Apple Part #922-9064, 922-9447, 922-9779, 923-0103
MacBook Pro 13" Unibody (Early 2011-Mid 2012) Upper Case
- Apple Part #661-5871, 661-6595, 661-6075
If the dent is on the display assembly rather than the lower case, you might want to keep the dented display as long as the display still works. Unibody MBP display assemblies are usually sold as complete units; the back case and bezel for the display assembly are fairly rare as separate parts. Disassembling a Unibody display assembly is an ugly job; don't do it if you don't have to...
If you need to replace the entire display assembly after a video failure, that part is also available:
MacBook Pro 13" Unibody (Early 2011-Late 2011) Display Assembly
- Apple Part #661-5868
Product
$39.99
Product
$39.99
Product
$89.99
Was this answer helpful?
It was a very helpful answer. Thanks a lot
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 92
