By replacing the hard drive suddenly the thermal sensor cabel was disconnected on both ends. The thermal sensor is to put on the back side of the hard drive.
But the connector?
Neither on the Mac mini, nor on the pictures of the guide i found the answer: Where is its place?
Is this a good question?
Rep: 478.9k
35
329
970
Yes, its a bit of hide 'n' seek here ;-}
Here's the location of the sensor cable connection on the logic board: Sensor cable connector.
Was this answer helpful?
Thank You very much.
Tommy
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 94
