Here's what's going on:
I have macbook pro "15 mid 2014 and run OS X Yosemite, after i try calibration battery. My macbook does not power up with 1 push on power button but need to hold 10 second, But when i plug in magsafe, it can power up with 1 push on power button.
I've done to reset SMC, VRAM / PRAM, and reinstall os x but it doesn't help.
Anyone can help?
Thanks
Is this a good question?
Rep: 685.2k
3.4k
1.1k
2.6k
Find out the real status of your battery, Download and run Coconut Battery and let us know your results.
Was this answer helpful?
I've installed it, and there's nothing wrong.
It may still be under warranty, get it in quickly. Extend your warranty with AppleCare. If unsure go here and enter your serial number to find your status with Apple: https://selfsolve.apple.com/agreementWar...
Is there any other way before I took it to the apple store.
Rep: 1.9k
7
6
1
Your battery connector may be loose. Grab an iFixit toolkit with the infamous pentalobe bit. Take off the bottom cover and push the battery connector in.
Was this answer helpful?
I've never tried it and i will keep your suggestion. Thank you
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 224
4 Comments
Hi Steven, just out of curiosity are you holding the power button for 10 seconds then quickly hitting the power button? I'm not telling you to do that just wondering if you are.
by John
I just holding the power button for 10 seconds. Am i going to do that?
by StevenAndrian
So after 10 seconds of holding it , you release and press and it starts up?
by John
I'm just holding the power button for 10 seconds, and it starts up.
by StevenAndrian