Hello all
I search thé fuse backlight to my a1370 is i5 please looks thé picture thanks
http://imageshack.com/a/img905/7933/SDtZ...
Sorry thé fuse it s okay what is thé pin for test lvds ? Please
Is this a good question?
Rep: 2.2k
4
15
1
If you zoom in -right in the middle of your picture you'll see Resistor with R010 and 638ZF its to the right of it ,its has a Nice big "P" letter on it , it's a inline p link fuse hope that helps. With your multimeter connect both leads with battery disconnected and no charger if it reads open-zero current (infinite resistance) it's blown.
Was this answer helpful?
John, can you be more specific, I'm not seeing it.
No problem, I just updated.
John, added an image to assist with this. Hope you do not mind. It's not about points, it's about helping out.....;-)
Thanks OT, not a very big P. No wonder I missed it.
Yeah I guess not , it looked big to me when I clicked zoom on the screen , I think what I mean was in terms of tiny components to have letters that visible its big , I'll work on it , thanks for the help OT .
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 615
4 Comments
Personne pour m aider ?
by Remy
"No one to help me?" Give it some time, there are only about three people on the forum that will know about this, and I'm not one of them.
by mayer
Remy, now you are going down a totally different rabbit hole. It sounds like you do not have a backlight. Connect an external monitor and see if that works. If it does you will have a totally different problem. You will need a schematic with board layout and at least a multimeter to check it out. You,'d be better off starting a completely new question instead of changing this one.
by oldturkey03
Hello
I havé test with externat monitor it okay for working and i have look thé lvds not problem no crack no damage but i want test pin because i think is led Blacklight
by Remy