Will not turn on, MagSafe doesn't glow
So i had a bit of an accident when i had My MacBook in My bed last night. I was logged out so it was at the login screen. It suddenly fell to the floor so I picked it up. Tried to log in but my keys wouldn't type anything. The trackpad was working so I pressed the shutdown onscreen icon.
After that I tried to power it up but no response from the powerbutton what so ever. The MagSafe was glowing orange. I plugged it out to take it to my desk and when I plugged the MagSafe back in it didn't glow at all. I have verified the magsafe works with another computer. Any ideas?
Is this a good question?
6 Comments
I took off the back end revealing logic board, battery and all else. Just to see if anything looks broken. I can't find anything. But I put in the MagSafe and sit back wondering what could be wrong. After a few minutes the fan started spinning. But only for a few seconds. I'm lost. Any help is appreciated.
by MrKay
unplug your keyboard and your battery leave them unplugged also look at where the magsafe dc jack plugs its in 2 spots a flat ribbon and a plug- in type make shure they are thight then connect your magsafe and report back what happens
by John
Is there any guide to unplugging the keyboard to this model? With images?
by MrKay
I found this video wich i'm following step by step. For those who need kbd service here it is: https://m.youtube.com/watch?v=2PyhbiwUkE...
by MrKay
I disassembled it completely then reassembled it making sure all connectors were tight. Now the powerbutton works and I got a reaction from the computer.
The fan fired up slightly longer than before. But still no chime and no glow on the MagSafe.
by MrKay
Show 1 more comment