I recently replaced my cracked screen and the new screen was totally unresponsive to touch. So I took it back out and put the old screen back. Now the old screen is unresponsive. I've done this before several times with no problem. I made sure the delicate cables were undamaged as has been suggested by other answers to the same problem. What else can I try? Anyone have any ideas?
Is this a good question?
Rep: 347
4
2
have you tried restoring? if not you may have damaged the ic coil on the motherboard that controls the touch. . You may need to contact someone who can fix motherboard problems !
Also make sure the connectors are seated properly and plugged in right .
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 59
