Skip to main content

Repair and disassembly guides for Samsung DVD players.

26 Questions View all

Samsung DVD Player HD-941 Powers up but no video signal output

It powers up but no video signal to same or other TV sets. I tried several different TV sets but all show no video signal.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Try a different video cable to see if that works.

Was this answer helpful?

Score 0

Comments:

Thanks. Never am I that lucky. I took the board out for inspection and found that Samsung to reap higher profits used a contact female connector held in place with 4 small drops of epoxy to the board. It holds until pressure on the cable and eventually separates and causing the board to be unrepairable. This is what happened and unless you are a Samsung technician your choices are shipment 2 ways , their tech fee, part fee if they have it and by then it is cheaper to buy another which I did but never another Samsung product. Again thanks.

by

Add a comment

Add your answer

Skipper Dorgan will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 273