Rep: 1
1
I dropped the phone and the screen cracked. After replacing the digitizer the screen registers my touch one icon to the left instead of where i touch. There's also a dead zone on the bottom portion of the screen that prevents me from accessing the dock icons.
Is this a good question?
Rep: 35.1k
140
71
53
you could try to reset the iphone (press the sleep and the home button at the same time until the phone restarts)
if that wont work, i would suggest that you reseat the connector of the digitizer.
if that wont work either - the digitizer is faulty and in order to get it working - you have to replace it. contact the company where you got it from - and try to get it replaced
Was this answer helpful?
Hi Ken. I have the same issue. Broken screen, and I replaced the glass, but now the touch is off. Is there a way to calibrate it? Ken, did you get yours working?
Was this answer helpful?
no - you can't calibrate it - replacing the faulty part is the only way to get it done
Completely agree with markus. I had to buy 2 more digitizers before it worked. The 2nd digitizer (the one i bought after posting this) was from amazon and it had the entire right side unresponsive. The 3rd digitizer i bought on eBay from a seller by named "gadgettown" and it worked flawlessly. So in short, the quality of these replacement parts vary.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 2,120
