Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

156 Questions View all

lines on display after lcd replacement

I am working on replacing the digitizer on my iPad 4. I believe I reconnected everything properly, except when I power it on to test it before reassembly all I can get out of the display are a series on horizontal lines. I tried unplugging and reconnecting the cable numerous times to no avail, I noticed when it is laying in the bezel it Almost seems right. I'm wondering if the metal contacts on the middle of ribbon cable, as in the plates not where the cable terminates, serve a purpose or have I possibly done some damage. Thanks for your help

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Hi,

It is more than likely you have damaged the Lcd, replacing the Lcd should solve your issue. :-)

Was this answer helpful?

Score 2

Comments:

Sure was the lcd, replaced it and was good to go. Thanks!

by

No problem :) make this your chosen solution since it was correct :-)

by

Add a comment

Add your answer

gonzominium19 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 92