Backlight issue after replacing the digitizer
Had a phone brought into my workshop where someone tried replacing the glass themselves and did a VERY poor job; the connector No3 is destroyed almost completely; however there is no backlight on the LCD (No1 & No2 connectors are absolutely fine); tested the LC Don a different phone - Works OK also tried with a known-good LCD - no backlight
could the No3 connector affect the backlight? if so where could i possibly get it re-soldered?
thanks!
Is this a good question?
2 Comments
i have the same problem
by Albert
try contacting hector truong he's one of the contributors here and he specialises in fixing the connector you have problems with. as for the backlight he may be able to help with that too.
by pollytintop