Fix Your Stuff Community Store

2.0GHz, 2.3GHz, or 2.6GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.8GHz) with 6MB shared L3 cache.

580 Questions View all
Question Closed

Options

The lower case glued seems to be glued down.

While trying to open the lower case of my late 2013 retina macbook pro 15in so I can clean out the accumulated dust (fan seems to be working harder than before), I've notice that the lower casing was being held down by something in the middle. (I have completely removed all scews and pried all four edges up.) On the second step of this link, a reader has also made a simular comment. I would really appreciate some confirmation as I do not want to risk damaging my rmbp.

MacBook Pro 15" Retina Display Late 2013 Lower Case Replacement

Thank you.

Sammy

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

It's just a little snap. Pop it right off.

Was this answer helpful?

Yes No
Score 2

1 Comment:

Thanks.

Im new to the forum so not sure if I am doing reply to your response.

I will re-try over the weekend and post my result afterward. The snaps were holding the lower case down pretty hard, enough to flex the case! I was concerned that it may deform the case if I use more force! Thanks.

by

Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 74