The third generation of Galaxy Tab including a 7.0, 8.0 and 10.1 inch display versions, as well as the Galaxy Tab 3 Lite 7.0.

408 Questions View all

I need help to repair the charging port

I need help to repair the charging port

but the problem is the board damaged when the charging port brooked as the attached photo https://www.facebook.com/photo.php?fbid=...

Block Image

the lead welding doesn't stick to the board

Answer this question I have this problem too

Is this a good question?

Score 3
Add a comment

1 Answer

Most Helpful Answer

mohtraxx, looks like you are not using enough flux, and an iron that is to big. If not sure how to properly attach it, I'd suggest you send it somewhere to get it soldered before you lose the solder pads as well.

Was this answer helpful?

Score 3

Comments:

Thank you oldturkey03

The problem is whil I removed the old port the bins removed with copper pads on board

by

the outside pins came off with the pads? Post an image of your connector as well with your question

by

Show 2 more comments

Add a comment

Add your answer

mohtraxx will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 138