Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

iPhone 6 screen replacement not working.

Hi,

I often repair iPhone's however this was my first time replacing an iPhone 6 screen.

I always check the screen works prior to fitting, which when I connected the replacement screen it didn't work.

Just to check that the phone was still turned on, I connected the old screen which didn't work.

After disconnecting it and reconnecting it, it worked. Thinking it was me with the replacement screen maybe not clipping the connectors on properly I tried it again with no prevail. After this I still can't get either the original screen or the replacement screen to work.

Can anyone give me any advice as what to do next?

Thanks in advanced, Harry

Answer this question I have this problem too

Is this a good question?

Yes No
Score 2
Add a comment

5 Answers

Filter by:
Most Helpful Newest Oldest

Options

What do you mean it doesn't work? It doesn't turn on? Touchscreen not working? Backlight not working?

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

I believe it's the back light, I think I've turned the phone off by the touch screen but am not definite it work. So I'd say it was the backlight. I've also tried both the damaged and replacement screen on my phone (a different phone) as to which they both work.

The phone is working fine as I can plug it into iTunes and noises and vibrations are made.

Thanks Harry

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

Have you tried pressing and holding the Power and Home buttons together down for a while until it restarts?

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

Yes, I have tried hard resetting it multiple times, as well as dis connecting the battery to try and remove the charge from the system. Just unsure what there is left to try.

Was this answer helpful?

Yes No
Score 0

1 Comment:

Most likely damage to the backlight traces either from using the wrong screw, or just shorting out the backlight circuit.

by

Add a comment

Options

Hi Harry,

you can check the LCD cable interface is connected. if u need more iphone parts, can buy from the partsifixit, is good price.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Harry Tomlinson will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 559