Rep: 1
1
The tools listed here MacBook Pro 15" Unibody Mid 2012 Logic Board Replacement are not helpful. I'm looking for a torq-set screw size which come in size 6, 8 or 10. I do not know the correct size for the screws which hold the Airport Bluetooth Card Bracket. The screws can be seen in this photograph.
Is this a good question?
Rep: 259
4
1
The logic board replacement instructions seem to indicate that it uses T6:
MacBook Pro 15" Unibody Mid 2012 Logic Board Replacement
Edit:
The screws in your image are most definitely Philips. I can't place the location against anything similar in the guides, but I'm guessing #00 based on the AirPort/Bluetooth guide:
MacBook Pro 15" Unibody Mid 2012 AirPort/Bluetooth Board Replacement
Edit 2:
I found the item depicted in the picture. It appears to be one of the retaining clips screwed to the upper case. This one appears to be between the battery and the optical drive. You shouldn't need to remove them, they were not removed during the teardown.
Guide
Difficulty:
Moderate
Guide
Difficulty:
Moderate
—
30 minutes - 1 hour
Guide
Difficulty:
Difficult
—
30 minutes - 2 hours
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 308
4 Comments
Which MBP 15"? Please give us the last four figures of your serial number.
by mayer
Serial No.: CO2JM3FMDV35
by Kyle Wegner
Apple MacBook Pro "Core i7" 2.6 15" Mid-2012 Specs
Identifiers: Mid-2012 15" - MD104LL/A - MacBookPro9,1 - A1286 - 2556*
by mayer
william hit the correct guide. Each guide lists the tools needed in the peramble.
by mayer